DOIO HITPAD Mini Series Instructions

May 09, 2024
DOIO HITPAD Mini Series Instructions
Published on  Updated on  

Basic Information:

Name: DOIO HITPAD M Series
Firmware: GP2040-CE
Product Link: Here

Download Resources:

Manual: Link
Firmware Update: Link
You will need 'Magicboots' to make the device compatiable with PS4 and PS5

Instructions:

Default Keymap

Input mode

To select an input mode,

Press and hold one of the following buttons before connecting the device.

1P-PS3 /D-Input  (RaspberryPi/Android)

1K-Nintendo Switch

2K-PC /X-Input  (Windows/Steam)

2P-PS4 Mode

*PS4 and PS5 require Magicboots or other converters, Magicboots MUST be purchased separately.


Orientation Mode

SELECT+START+DOWN ARROW = Visual helmet mode(DP)

SELECT+START +LEFT ARROW = Left-analog stick

SELECT+ START+RIGHT ARROW = Right analog stick


SOCD Mode
HOME + START+DOWN ARROW = Neutral (up+down=middle, left+right=middle )

HOME +  START+UP ARROW = SOCD1 (up+down=up, left+right = middle)

HOME+START+LEFT ARROW= Last input priority (post-override)

RGB Mode

SELECT+ START+1P = Next Animation

SELECT + START +1K = Previous Animation

SELECT+ START +2P = Brightness Up

SELECT+START+2K = Brightness Down

SELECT+ START +3P =Switch to Next Lighting Preset

SELECT+ START +3K = Switch to Previous Lighting Preset

SELECT+ START+4P = Next Key Triggers Light Color

SELECT+ START+4K = Previous Key Triggers Light Color  

    Rapid Fire Mode

    Press and hold the TURBO button, then press the button you want to set for continuous shooting. Once set, you can cancel rapid fire by repeating the same action.

    Rapid fire can be set for 1P, 2P, 3P, 4P, 1K, 2K, 3K, or 4K, across 8 buttons.
    The firing rate can be adjusted within the range of 1 to 60 shots per second (individual button firing rate adjustment is not supported).

    Hold the TURBO button and press the UP key to increase the firing rate, or hold the TURBO button and press the DOWN key to decrease it.

    Even if the power is turned off, the set firing rate will be saved, but the rapid fire button status will be cleared.

    Key Mapping

    Keys/Modes

    XINPUT

    SWITCH

    PS3

    DINPUT

    GP2040

    1P

    X

    Y

    1

    B3

    2P

    Y

    X

    4

    B4

    3P

    RB

    R

    R1

    6

    R1

    4P

    LB

    L

    L1

    5

    L1

    1K

    A

    B

    ×

    2

    B1

    2K

    B

    A

    3

    B2

    3K

    RT

    ZR

    R2

    8

    R2

    4K

    LT

    ZL

    L2

    7

    L2

    SELECT

    BACK

    -

    SELECT

    9

    S1

    START

    START

    +

    START

    10

    S2

    LS

    LS

    LS

    L3

    11

    L3

    RS

    RS

    RS

    R3

    12

    R3

    HOME

    XBOX

    HOME

    13

    A1

    TP

    SCREENSHOT

    14

    A2


      Changing Key Values

      We recommend prioritizing key remapping within the game. If the function cannot be achieved, please use the following features.

      Press and hold the Start button before connecting the Type-C cable. Click http://192.168.7.1/ to access the debug page.

      Click on "Configuration" and select "Pin Mapping."

      Each pin corresponds to a specific key value. Such as changing the UP key to the L1 position, changing the L1 pin to 2 and the UP pin to 13. Save to apply.



      Switching to PS5 Mode

      Click on "Settings" and select "Input Mode" (choose PS4).

      On the right side, select "Arcade Joystick" and click "Save."

      Click on "Configuration" and select Add-Ons Configuration."

      Enable "PS Direct Authentication" by selecting D+ as 26 and D- as 27 and click "Save."

      Reconnect the Type-C cable, then connect the MagicBoots for PS5 use.

      Note:To add a new user: Press the Home key, a page will appear, click "Add User"

      Switching to Keyboard Mode

      Click on "Settings" and select "Input Mode" (choose Keyboard), then click "Save."

      Click on "Configuration" and select "Keyboard Mapping."

      Use the form below to reconfigure your button-to-key mapping, Then click ”Save“ button.

      To activate the keyboard switch, reconnect the Type-C cable.


      Configure Custom Lighting Theme

      Click on "Configuration" and select "Custom LED Themes."

      Click the "Enable" button, then set the colors for Normal and pressed lights by clicking the corresponding buttons.

      Click "Save," then reconnect the Type-C cable to apply the changes.


      Switching to PS4 Mode and Avoiding 8-Minute Timeout

      Access the debug page, click the "Settings" at the top.

      Under "Input Mode", select "PS4" from the dropdown,and select the "Controller" option on the right side, click “Save”.

      Click on "Configuration" and select Add-Ons Configuration."

      Find “PS4 Mode” and “Enable it, Upload these 3 files it needs, then click “verify & Save”.

      Slide to the bottom of the page, click “Save, then reconnect to the PS4 console, the 8 minutes disconnected issue will be solved.

      * Files are not provided.

      To add a new user: Press the Home key, a page will appear, click "Add User"
       

      Note:

      We do not provide support or assistance for system upgrades on disassembled units. Disassembly may result in device damage.

      Version:

       Uptade 2: May 10

      Published on  Updated on