DOIO HITPAD Pro Series Instructions

Basic Information:

Download Resources:

Instructions:

Default Keymap

Mode Selection

Input mode

1P-PS3 /D-Input (RaspberryPi/Android)

1K-Nintendo Switch

2K-PC /X-Input (Windows/Steam)

2P-PS4 Mode

Orientation Mode

SELECT+START+DOWN ARROW = Visual helmet mode(DP)

SELECT+START +LEFT ARROW = Left-analog stick

SELECT+ START+RIGHT ARROW = Right analog stick

SOCD Mode

RGB Mode

SELECT+ START+1P = Next Animation

SELECT + START +1K = Previous Animation

SELECT+ START +2P = Brightness Up

SELECT+START+2K = Brightness Down

SELECT+ START +3P =Switch to Next Lighting Preset

SELECT+ START +3K = Switch to Previous Lighting Preset

SELECT+ START+4P = Next Key Triggers Light Color

SELECT+ START+4K = Previous Key Triggers Light Color

Rapid Fire Mode

Rapid fire can be set for 1P, 2P, 3P, 4P, 1K, 2K, 3K, or 4K, across 8 buttons.
The firing rate can be adjusted within the range of 1 to 60 shots per second (individual button firing rate adjustment is not supported).

Hold the TURBO button and press the UP key to increase the firing rate, or hold the TURBO button and press the DOWN key to decrease it.

Even if the power is turned off, the set firing rate will be saved, but the rapid fire button status will be cleared.

Key Mapping

Changing Key Values

Press and hold the Start button before connecting the Type-C cable. Click http://192.168.7.1/ to access the debug page.

Click on "Configuration" and select "Pin Mapping."

Each pin corresponds to a specific key value. Such as changing the UP key to the L1 position, Setting PIN 02 to "L1" and PIN 13 to "UP.". Save to apply.

Save up to 4 different key value sets under "Profile 1~4" at the top. To set a specific set of key values, click the "Map buttons with switch" , select it and click the "Save" button.“ ”

Pin Number

Switching to PS5 Mode

Access the debug page, click the "Settings" at the top.In the "Input Mode" tab, select "PS4" from the dropdown menu. On the right, select "Arcade Stick" and click "Save."

Click on "Configuration" and select "Peripheral mapping" . Enable "USB Host" function, change "D+" to "26." and click "Save."

Click on "Configuration" and select "Add-Ons Configuration."

Enable "PS Direct Authentication" and Unenable "PS4 Mode" , click "Save".

In the top right corner of the webpage, switch to PS4 mode, then click "Reboot - Controller".

Switching Keyboard Mode

Access the debug page, click the "Settings" at the top.In the "Input Mode" tab, select "Keyboard" from the dropdown menu, Switch to "GP2040" in the top right corner of the webpage, then click "Save."

Click on "Configuration" and select "Keyboard Mapping."

After clicking the "Save" button, then reconnect the Type-C cable to apply the changes.

Configure Custom Lighting Theme

Click on "Configuration" and select "Custom LED Themes."

Click the "Enable" button, then set the colors for Normal and Pressed lights by clicking the corresponding buttons.

Click "Save," then reconnect the Type-C cable to apply the changes.

Switching to PS4 Mode and Avoiding 8-Minute Timeout

Access the debug page, click the "Settings" at the top. In the "Input Mode" tab, select "PS4" from the dropdown menu. On the right, select "Controller" and click "Save."

Click on "Configuration" and select “Add-Ons Configuration".

Find “PS4 Mode” and “Enable” it, Upload these 3 files it needs, then click “verify & Save”.

In the top right corner of the webpage, switch to PS4 mode, then click "Reboot - Controller".

Note:

We do not provide support or assistance for system upgrades on disassembled units. Disassembly may result in device damage.